ULT-PRO-HARD-FLEX, Stiff Composite Marine - Hobby Longboard Hand Sanding Block

Description: ULTIMATE PRO HARD FLEX COMPOSITE LONGBOARD Wrap-It, Hand Sanding Block Kits.> Just Cut the Abrasive to the right length with a scissors.> Then place the 1" wide block on one edge of the sandpaper.>Then Roll the block on a hard surface, wrapping the abrasive around 3 sides of the block. Hard Stiff Light Weight Composite Body. Ultra Light Weight Stiff Composite.> Note, the shorter blocks do not flex much...but the blocks over 11 inches flex more and more. Square-Grip Profile for Comfort and ControlGreat Marine Longboard Hand Sanding Block, Floats if dropped in water.PSA, Uses Peel & Stick Adhesive Longboard Sandpaper. Sandpaper can be placed on both sides of the block...the hard or the Rubber Side. Blocks range from 5 1/2" to 33" Long. Made of Ultra Light Weight Engineered Composite Closed Cell. Light weight makes hand sanding easier and faster. Note the short blocks are extra stiff and are not designed to flex. The longer blocks, 11" to 33" flex...the longer the block the more the flex. Use 2 3/4" wide abrasive available in standard 16 1/2" Precut lengths or Cut-to-Length rolls. Use a scissors to cut to proper length depending on the best sanding block length. Great for hobbies, crafts, home remodeling, boat and yacht repair...etc. 9 Piece 16 1/2" Kit & PSA SandpaperUltimate-PRO-Hard-Flex-LongboardBlocks 2 3/4" to 16.5" long. This Kit Includes the Following 9 items. 1) One 3/4" Thick * 1" Wide x 16 1/2" Long Block, uses a Full Sheet of PSA sandpaper.2) One 3/4" Thick * 1" Wide x 11" Long Block, uses a Full Sheet of PSA sandpaper. 3) One 3/4" Thick * 1" Wide x 8 1/4" Long Block, uses 1/2 Sheet of PSA sandpaper.4) One 3/4" Thick * 1" Wide x 5 1/2" Long Block, uses 1/3 Sheet of PSA sandpaper.5) One 3/4" Thick * 1" Wide x 4 1/8" Long Block, uses 1/7 Sheet of PSA sandpaper.6) One 3/4" Thick * 1" Wide x 2 3/4" Long Block, uses 1/7 Sheet of PSA sandpaper.7) One Sheet Coarse #40 Grit, 3/4 x 16 1/2" Sheet of PSA Production Peel & Stick Sandpaper..8 & 9) One Sheet Coarse #40 Grit, 3/4 x 16 1/2" Sheet of PSA Production Peel & Stick Sandpaper. 6 Piece 16 1/2" KitUltimate-PRO-Hard-Flex-LongboardBlocks 2 3/4" to 16.5" long. This Kit Includes the Following 6 items. 1) One 3/4" Thick * 1" Wide x 16 1/2" Long Block, uses a Full Sheet of PSA sandpaper.2) One 3/4" Thick * 1" Wide x 11" Long Block, uses a Full Sheet of PSA sandpaper. 3) One 3/4" Thick * 1" Wide x 8 1/4" Long Block, uses 1/2 Sheet of PSA sandpaper.4) One 3/4" Thick * 1" Wide x 5 1/2" Long Block, uses 1/3 Sheet of PSA sandpaper.5) One 3/4" Thick * 1" Wide x 4 1/8" Long Block, uses 1/7 Sheet of PSA sandpaper.6) One 3/4" Thick * 1" Wide x 2 3/4" Long Block, uses 1/7 Sheet of PSA sandpaper. 5 Piece 11" KitUltimate-PRO-Hard-Flex-LongboardBlocks 2 3/4" to 11" long. This Kit Includes the Following 5 items. 1) One 3/4" Thick * 1" Wide x 11" Long Block, uses a Full Sheet of PSA sandpaper. 2) One 3/4" Thick * 1" Wide x 8 1/4" Long Block, uses 1/2 Sheet of PSA sandpaper.3) One 3/4" Thick * 1" Wide x 5 1/2" Long Block, uses 1/3 Sheet of PSA sandpaper.4) One 3/4" Thick * 1" Wide x 4 1/8" Long Block, uses 1/7 Sheet of PSA sandpaper.5) One 3/4" Thick * 1" Wide x 2 3/4" Long Block, uses 1/7 Sheet of PSA sandpaper. 4 Piece 8 1/4" KitUltimate-PRO-Hard-Flex-LongboardBlocks 4 1/8" - 11" long. This Kit Includes the Following 4 items. 1) One 3/4" Thick * 1" Wide x 8 1/4" Long Block, uses 1/2 Sheet of PSA sandpaper.2) One 3/4" Thick * 1" Wide x 5 1/2" Long Block, uses 1/3 Sheet of PSA sandpaper.3) One 3/4" Thick * 1" Wide x 4 1/8" Long Block, uses 1/7 Sheet of PSA sandpaper.4) One 3/4" Thick * 1" Wide x 2 3/4" Long Block, uses 1/7 Sheet of PSA sandpaper. Note, None of these kits includes any sandpaper. Sandpaper must be ordered separately. These blocks are designed to be used in a dry environment. The can handle water for minutes but not continuous exposure for hours. Do not let them get wet or stay in a damp environment for hours.. These blocks can absorb water over time. The block can absorb water over time and swell in size. If the block gets wet, place it on a flat surface in a dry room to recover. Hand Sanding Blocks available in the following sizes individually;One Inch tall by 2 3/4" Wide by >>> 2 3/4", 4 1/8", 5 1/2", 6", 8 1/4", 9", 10", 11", 12", 16 1/2", 18", 20", 24" & 33" Long. With our quick turnaround we typically get your order out in a couple of days...first class mail. Most our our customers receive their order in 3 to 5 business days from when we receive payment. Since this package typically weighs less than 1 lb. it often ships as fast as a letter. We do not ship this package USPS Priority Mail unless the total weight of the package is close to two pounds...because it costs significantly more money and is typically not any faster delivery. Note: Getting the Blocks wet with intermittent water and getting the block wet is fine.Some Longboard Sandpaper is not suitable if it gets wet. Test a small corner to see if the paper is water resistant. This tool comes in various sizes and is an excellent tool for small to large projects. Use it to sand furniture, floors, walls, ceilings, etc. Use it to sand wood, painted surfaces, from projects ranging from home repair to autobody to boat repair. It is especially useful when sanding large flat areas such as sheetrock. The bottom surface of the block is extremely flat. This is a great block when a mirror flat surface is desired. Always select open coat abrasives that can be unloaded if clogged by whacking the face of the sandpaper with a thin wire rod such as a coat hanger wire or small wooden paint stick or rod.

Price: 1 USD

Location: Auburn, Washington

End Time: 2024-02-16T05:44:32.000Z

Shipping Cost: 4.95 USD