Description: LISTING IS FOR FIRING PIN RETURN SPRING ONLY, OTHER COMPONENTS SHOWN IN PICTURE FOR REFERENCE ONLY.An essential upgrade for Encore, Pro hunter, Endeavor or Omega. Your stock firing pin return spring takes quite a lot of abuse. Due to the frail construction of the stock spring, dry firing, not correcting headspace, and not cleaning this part of the frame, they need to be replaced periodically. One look at the picture above shows the difference in our spring and a lightly used factory spring, but there's more to it than just appearance. Our heavy duty firing pin return springs are heat treated and designed to absorb the impact of heavier hammer springs and repeated use. Because our springs are a larger wire diameter than the factory and add additional coils it will perform better and last longer. No gunsmith needed replacement instructions: Anyone can do this. Remove the barrel from the frame. You will need to push back the interlock on the right side of your frame in order to cock the hammer. This is the flat metal piece that moves back and forth in order to tell the frame a barrel is securely closed, you'll have to trick it in order to cock the hammer. Next with a 7/64" allen key remove the firing pin bushing screw located directly above the firing pin on the outside of the frame just above where the hammer impacts firing pin, this screw retains the firing pin bushing. Once the screw is removed, the firing pin bushing, firing pin and spring will come out as a unit. Note the stock firing pin return spring is cone shaped and the pointed end is pointed to the back of the frame, the wider end of the spring towards the bushing. Now is a great time to clean the firing pin bushing and firing pin using a good gun cleaner, I prefer Hoppes Gun Cleaner elite or better yet is MPRO7. This area gets a lot of carbon buildup and is important to keep well cleaned especially if you are shooting a muzzle loader. Make sure you periodically clean this area of the frame and components. A light coating of anti rusting lubricant wouldn't hurt anything on the spring and firing pin bushing, WD40 or similar. Replace the stock spring with ours and re assemble. Tip: Print this page out so you have the disassembly/reassembly sequence and safety function checks handy. No printed detailed instructions come with the springs or pliers. Purchase our Bellm Trigger Job Instruction Manual Separate. Mike Bellm's TCs has been serving the TC shooting community for over 30 years, you are buying from the trusted TC Encore and Contender expert. Small parts orders and other auctions can be combined shipping, your small parts and barrel orders will be packaged by a Bellm pro. We can accept any major credit card by phone.
Price: 8.95 USD
Location: Olathe, Colorado
End Time: 2024-03-13T04:51:22.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or exchange (buyer's choice)
Return shipping will be paid by: Buyer
Specific Part: FPRSEnc
Brand: Bellm TCs
For Gun Make: Thompson Center
For Gun Model: Encore Pro Hunter Endeavor Omega FX
Country/Region of Manufacture: United States
MPN: Does Not Apply
