Description: NOTE：It is recommended that only the spindle be used to cut the wood, which can improve the service life of the bearingWhen receiving the spindle, please start to rotate at 6000rpm and increase it by 3000RPM every 10 minutes until it can be used normally after 24000RPM (Preheating and running-in are required between new spindle bearings)In order to prolong the service life of the spindle, it is recommended to test run for 10-15 minutes before using the spindleSpecificationVoltage and rated currentAC 220V, 10ABearing7005 (2pcs)and 7002(2pc) bearingsMaterialStainless steel housing:red copper coilSafe operating range8000-24,000 RPMRadial runout0.01mmCoaxality0.025mm (2.5 microns)Frequency400hzColletER20 collet, 6mm is standardNut modelER20-A(B)Cooling waywater cooling wayLubrication wayhigh temperature resistance grease lubricationSize80*238 (mm)Huanyang water cooled spinsleExcellent materialAdopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grindingStrong TorqueHigh rotation speed while maintaining strong torque,to achieve the desired process requirementsRed copper coil woundThe conductive property, tensile strength, electric loss rate and other indicators of red copper coil are better than aluminum, greatly improving the service life of the spindleCharacteristic4 Bearings rotation, with strong torque, also maintain a high degree of stabilityLubricated with grease, which is resistant to 200 degrees high temperatureThe bearing adopts high speed angular contact bearing,Motor working noise is low, avoid hearing fatigue.Package ContentConnectPower interface: YX20 water proof aviation plug marked with number 1, 2, 3, 4. Number 1, 2 and 3 inter-faces are connected with inverter power U, V, W respectively. Number 4 is connected with earth wireUsing water circulation cooling spindle high-speed generated heat,The water outlet is high compression casting aluminum tube,with stronger rust proof functionStrong shell bearing capacity, more solidER20 dynamic balance collet4-hole aviation connector1 x 220v-2.2kw spindle1 x YX20 aviation connector1 x Er20 collet (6mm is standard)1 x NutProcessVoice QuietComprehensive advanced technology and excellent material, so that the spindle can maintain excellent noise reduction ability even at high speed rotationWater Circulation CoolingUsing water circulation cooling technology, according to the characteristics of large heat capacity of water, make the temperature rise slowly, effectively disperse the internal temperature of the spindle, improve the service life of the spindle.4 Strong BearingsExcellent spindle material and high precision,At high speed rotation can also produce strong torque and maintain balance
Price: 204.98 USD
Location: shanghai
End Time: 2024-09-22T09:14:08.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Actual Rated Input Voltage: 220V
Inverter/Vector Duty Rating: Inverter Duty
Full Load Amps: 10A
Rated Load (HP): 3
AC Frequency Rating: 400Hz
Special Motor Construction: Spindle Motor
Enclosure Type: TEWAC (Totally Enclosed Water to Air Cooled)
Base RPM: 24000
Shaft Type: Tapped
AC Motor Type: Induction/Asynchronous
MPN: 220-2.2-80-4 spindle
Mounting Type: Clip-Mounted
Reversible/Non-Reversible: Non-Reversible
Brand: huanyang
Current Type: AC
Unit Type: Unit
Model: 220-2.2-80-4 spindle
Nominal Rated Input Voltage: 220 V
Country/Region of Manufacture: China
Unit Quantity: pcs
AC Phase: Three Phase
