Sansui AU-417 reproduction rear bumpers (SRB1)

Description: Sansui reproduction rear bumpers SRB1 These are reproduction rear bumpers that were designed based on the original part. Below is a list of compatible models. AU-417AU-517AU-717AU-719AU-819AU-919TU-417TU-517TU-717TU-719TU-919 The included mounting screws have the same thread pitch as the OEM screws, but the threads have ~0.2mm larger diameter. If bumpers have never been installed on your unit, it may take some effort to drive the screws to form threads in the rear panel. If bumpers have been installed with original screws previously, then these screws should only very slightly enlarge the existing hole. Using the included screws is optional, and you may need to use other hardware depending on what (if anything) was used previously. I designed these bumpers in CAD using measurements taken from an original bumper part. They are nearly identical to the original part in terms of shape, wall thickness, weight, etc. In terms of finish, they have a matte texture on the bumper ends, while the sides have a grooved texture similar to an LP (print layers). The last two photos show one original bumper and one reproduction bumper. They are printed on a Prusa i3 Mk3S FDM 3D printer using PET-G plastic. Each pair takes just under 5 hours to print. These are printed on demand, and handling time may be up to 4 days. In most cases it will be shorter. Feel free to contact me with questions. I also sell speaker terminal binding post adapter kits for many Sansui integrated amplfiers, amplifiers, and receivers. Here is some recent feedback for this item: Excellent craftsmanship, the bumpers are beautifully made, and look great. Promptly shipped and very well packaged. I recommend booja30 as an excellent seller.- cliffpar-8 Beautiful, just beautifully printed , great seller/ printer. Great communication!! Great packaging ! Great fast shipping. This is the type of seller you want to do-business with!!! Professional 3D printer- zmangarage These bumpers are outstanding!!!!! Thank you. Hard to tell from the originals. Excellent ebay merchant! Very beefy and well made. You would not be disappointed!👍👍👍👍👍- rickk73 Very nice quality reproduction rear bumpers for my vintage Sansui stereo amp. Glad you’re making them! Fast shipping as well.- cvnelson Better than the originals!- franknpom Received item as described, shipping and packaging was good for the reproduction bumper's (USPS in this case). Quality much better then anticipated as it's not just for looks but thick enough plastic to be functional. The "bumper's" fit the TC-2110 Sansui cassette deck perfectly and screwed into the existing holes with perfect alignment. With a quick shot of flat black spray paint, the bumper's match the others in the old 45 year old Sansui system.- broken_hardware Thanks for the heads-up that the mounting screws might be hard to install. They were. But armed with this info I installed them without difficulty and the bumpers fit perfectly on the back of my beautiful AU 517. Excellent product and excellent service. This seller is HIGHLY recommended.- swimmer411 Superior product and communication. Thanks so much!!!- avant.bored I won’t be able to install these on my Sansui AU-717 and TU-717 for a few weeks, but they look very well made. Nice work!- bholleman

Price: 45 USD

Location: Seattle, Washington

End Time: 2024-09-14T00:27:47.000Z

Shipping Cost: 0 USD