Roland Juno-106 Polyphonic Analog Synthesizer - Serviced + VCA/Chorus In Mod

Description: Serviced and fully, reliably working - sounds beautiful! Pickup preferred (I'm in West Philadelphia) - but will ship anywhere in the USA. Condition details: There is one 8" scratch near the Juno-106 text on the panel, but not through the paint. There are also a few smaller lighter scratches, a few tiny rust spots/defects, and a small bit of very stubborn tape residue on the front panel. All defects are fairly unnoticeable unless viewed from an angle under certain lighting conditions. A few of the keys have light scratches or small marks. Note that the service approach was to get it fully working, and looking better, and not necessarily to restore it to original condition - several hundred $ were spent on restoring functionality. Repaired/rebuilt parts have been extensively used/tested and should hold up well. Proper restoration with original or boutique replacement parts would likely cost another $150 - $200 more. Full list of repairs/mods done: Replaced one failed 80017a voice chip/card (Analog Renaissance replacement). Epoxy removed from all remaining working voice chips to prevent future shorting/failureRebuilt/repaired Pitch Bend lever (LFO switch (push up on Pitch Bend) also works)Replaced all panel tact switchesReplaced Output Level switchRebuilt/repaired HPF slide-switch (doesn't slide as smoothly as original, but works fine - replace with original / replacement slide-switch for proper restoration)6 Replaced slide pots (standard wiper/lever - original Juno-106 slider caps will not fit these - replace with Juno-106-specific slide pots for proper restoration)Most slider caps replaced (DIY - replace with Juno-106-specific slide pots and caps for proper restoration)Repaired 2 damaged panel button assemblies (the Chorus off button sits very slightly lopsided but works fine - replace with original panel button assemblies for proper restoration)Blue LED mod (previous owner mod) replaced with red/orange/yellow LED's (replace with diffused Red LED's for proper restoration)Replaced damaged & scratched original plastic sides with red oak wood sides (original sides included if you request - one side has a cigarette melted spot and there are several damaged screw mounting holes - paint & repair, or replace for proper restoration)Several key springs replacedRepaired slightly damaged black key (crude but effective DIY fix so that it doesn't "stick up" compared to the other keys - replace for proper restoration)Service Manual Adjustment Procedure completed.VCA/Chorus In Mod (replaces Patch Shift input)

Price: 1350 USD

Location: Philadelphia, Pennsylvania

End Time: 2024-12-12T19:29:52.000Z

Shipping Cost: N/A USD