portable ads-b receiver WASS GPS AHRS And Battery Included

Description: It is ready to go, you do not need to do anything but screw on the antennas. I build them with all new parts and custom-made SDRs for the best performance available. A battery is included, it will last about 4-5 hours on a full charge. Please understand what you are buying and how the Stra... software works. Ask any questions before ordering, Check with your efb to make sure it will work. Sta... uses Wifi to connect to your device, not bluetooth. Ask any questions before ordering. It has dual band receiver for 978mhz weather and 1090mhz traffic, has the internal GPS unit for gps it also has AHRS installed. Guaranteed to work out of the box. Uses a Raspberry PI 3B+2- Custom made SDRsLatest release of the software is included1- Gps unitSummitlink case with suction cup mountsComes with long antennas +5db gain 1090mhz and 978mhz tunedHas the AHRS unit installedMost recent software installed on SD card installed and testedComes with a rechargeable 10000mAh battery pack and short cableWorks with Foreflight, Avare, Garmin pilot (on iPad), and most other EFB apps Not a Stratus receiver.Battery lasts 3-4 hours at full charge Quick Start Guide for the Strat Software ADS-B Receiver Welcome to your Strat Software ADS-B Receiver! This guide will help you set up and start using your device quickly and easily. What’s in the Box - Stra... ADS-B Receiver- 1090mhz and 978mhz antennas- Battery and USB power cable- Quick Start Guide Step 1: Unbox and Inspect 1. **Verify Contents:** Ensure you have all components listed above.2. **Check Device:** Inspect the Stra receiver for any visible damage. Step 2: Connect the Antennas 1. **Locate the Antenna Ports:** Find the 1090 mhz and the 978 mhz antenna ports on the Stra unit.2. **Attach Antennas:** Screw the ADS-B antenna into the proper place. Ensure they are securely connected and oriented vertically for optimal reception. Step 3: Power Up 1. **Power Source:** Connect the USB power cable to the Stra receiver.2. **Connect Power:** Plug the other end of the USB cable into a USB power adapter or portable power bank.3. **Turn On:** Ensure the power source is turned on. The Stra unit should start up and begin broadcasting a Wi-Fi signal, it can take a couple of minutes on first start. Stra does not have a power button, it is on all the time it is plugged in to the battery. Step 4: Connect to the Wi-Fi Network 1. **Open Wi-Fi Settings:** On your tablet or smartphone, go to the Wi-Fi settings.2. **Select Network:** Find and connect to the Wi-Fi network named “Strat..” . No password is needed. Step 5: Access the Web Interface 1. **Open a Web Browser:** Launch a web browser on your connected device.2. **Enter IP Address:** Type `192.168.10.1` into the address bar and press Enter. This will open the Strat web interface. Step 6: Configure Your Receiver 1. Check the status page to ensure everything is working properly.2. **Adjust Settings:** Configure the device settings to match your preferences. This may include setting update frequencies, enabling or disabling features, and checking the device status. Step 7: Connect to an Aviation App 1. **Download an App:** Ensure you have a compatible aviation app installed on your tablet or smartphone (e.g., ForeFlight, SkyRadar, Avare).2. **Open the App:** Launch the app and navigate to the settings or connections menu.3. **Select Stra...:** Choose the Stra... receiver from the list of available sources to start receiving data. Step 8: Start Receiving Data 1. **View Data:** The app will begin displaying real-time ADS-B data, including aircraft positions, weather updates (if you are near a tower), and more.2. **Monitor:** Use the data to enhance your situational awareness and flight planning. Troubleshooting Tips - **No Signal:** Ensure antennas are properly connected and oriented. Check for obstructions.- **Connection Issues:** Restart both the receiver and your device. Verify that you’re connected to the correct Wi-Fi network.- **Data Not Updating:** Check app settings to confirm it’s connected to the receiver. Verify configuration in the web interface. Safety and Maintenance - **Placement:** Keep the receiver in a location with a clear view of the sky for optimal performance.- **Firmware Updates:** Periodically check for and apply firmware updates as needed.- **Cleaning:** Wipe the device with a dry cloth. Avoid using liquids or abrasive materials. Congratulations! You’re now ready to use your ADS-B Receiver and enjoy enhanced flight awareness. Safe travels! Keywords, weather radar,adsb receiver,ipad gps receiver,ads-b,ads-b receiver,adsb,adsb antenna,aviation radio receiver,bad elf gps,flightaware,usb gps antenna,chirp software,fore flight,dog tag tool,garmin flight gps,avionics tool kit,dt systems power loads,ads-b antenna,garmin aera 660 gps,handheld satellite communicator,true back device,flight controller mount,aviation weather,inhibidores de señal,vxdiagnano,ads-b,sentry adsb,foreflight sentry ads-b receiver,electronic price tag,wirelessbeacon,waas,dual battery system kit,totem of undying,dual electronics xgps,flightaware,prostick plus,fly link tech,airband radios,dog training air,stratus,gps tag for car,ahr,ads b receiver kit,compare gps,,tekpow,gps for planes

Price: 225 USD

Location: St. George, Utah

End Time: 2024-10-29T12:15:21.000Z

Shipping Cost: 0 USD