EZ Dupe 1 to 9 NVMe Cyclone 600 Duplicator & sanitizer M.2 PCIe Cloner 600MBps

Description: With flash media evolving worldwide, so has the need for duplication for such medias. The latest being the next generation of smaller storage on computers and mobile devices. As such so has EZ Dupe in revolutionizing the M.2 NVMe market!EZ Dupe proudly presents our newest entry to the high tech industry duplication services. The NVMe Cyclone series! The NVMe Cyclone comes in two duplication copy sizes (up to 4 or 9) and two separate speed (300MB/sec and 600MB/sec). Each of the 4 variations will be in two series in standard (for PCIe NVMe & SATA NVMe) and Pro (PCIe NVMe, SATA NVMe, & SATA interfaced Hard Drive Disks). Total of 4 NVMe Cyclone and 4 NVMe Cyclone Pro duplicators will be in the market.EZ Dupe Cyclone duplicator is a specially designed architecture to support M.2 NVMe and M.2 SATA SSD. This PCIe M.2 SSD duplicator fits for enterprise applications and digital computing devices. Copy information onto multiple drive formats simultaneously with the 1 to 9 M.2 PCIe NVMe / SATA SSD Duplicator and Sanitizer from EZ Dupe. Designed to deploy files across multiple M.2-based drives efficiently, this duplicator gives you the ability to copy up to Four M.2 NVMe solid-state drives simultaneously with a single press of a button.This duplicator is ideal for enterprise-level tech professionals who need to image several computers, backup files, and fully erase drives with ease.Easy to UseThis duplicator can be used with a computer or standalone, allowing you to use disk-to-disk duplication or copy without the need for additional software.Easily copy, erase, and format multiple M.2 NVMe drives simultaneously with the press of a button. If needed, quick, full and custom erase functionality is also available, enabling you to efficiently factory reset your drives.Optimal CompatibilityCreate copies quickly with data transfer rates up to 36GB per minute or 600MB per second, giving you quick and efficient duplication across M.2 drives. This duplicator supports different interfaces including M.2 NVMe, B Keys, M Keys, and B + M Key drives. It will accept 22mm wide keys (M, B, and B+M).While these formats are supported, copying is only possible between devices that share the same format. Additionally, lower speed solid-state and hard-disk drives can be filtered out with setup for higher copying efficiency.Independent Channel on each slotEach slot has its own independent bandwidth with the max copy speed set at the slowest speed of the M.2 NVMe. When a bad M.2 NVMe stalled during the duplication copy process, the duplicator will automatically reject the stalled M.2 NVMe and the max copy speed will increase for the remaining copy slots.Event Log FileDownload your Event Log File to one of the drive to confirm the status of each job function employ by the NVMe Cyclone. Event Log file's information includes: status of the job function, date/time stamp, and the drive's identification numbers.Efficiently DesignedThe user-friendly design creates easy access for host and target drives, producing an ergonomic feel and making tasks easier to complete. The durable construction is built for long-lasting daily operation, keeping your production moving along efficiently. FeaturesM.2 NVMe / M.2 SATA SSD connectionsThe NVMe duplication area can be inserted on the flatbed mount area of the duplicator. 22mm sized module of B-Key, M-Key, and B+M Key are all accepted. The length size of 2230, 2242, 2260, and 2280 keys can be inserted on each of the designated area with rubber stopper on the bottom for the longest key to prevent over-insertion.. Daisy-Chain Cyclone Daisy Chain your NVMe Cyclone to another NVMe Cyclone!With NVMe Cyclone, you can connect multiple NVMe Cyclone together to increase the amount of the duplication copies at the same time from one source slot of the duplicator. Daisy-Chain up to maximum of 255 NVMe Cyclone 300 together from one source to max slot copies of 1019.Please note in that it needs to be in same models (ie NVMe Cyclone 300 to NVMe Cyclone 300.... or NVMe Cyclone 600 to NVMe Cyclone 600). It cannot mix different speed of NVMe Cyclone or NVMe Cyclone Pro.Downloadable Event Log FileDownload the Event Log File to one drive for the detailed information of the completed function. The event log file would include the detailed type of job function, date/time stamp of the completed job function, and the Identification number of the drive.Purchase the Log File Printer to connect the NVMe Cyclone Pro to get the printed detail events of each job function. (Coming soon)Copy Modes & Erase ModesCopy Modes:Whole media copy - Comprehensive (Full Copy)Whole Media copy will copy the entire M.2 NVMe drives regardless of whether it has been partitioned or not. Longer Duplication Time is expected for full copy.System and Files Copy – Intelligent Copy (Quick Copy) System and Files Copy copies only stored system and files data, not unused space area. Intelligent Copies that duplicates essential files in the M.2 NVMe drives to save time.Example: Partition 1 has a capacity of 158GB with 58GB of data in it. Only 58GB of data will be copied while unused space area will not be copied. All Partitioned Copy - Copy Partitioned Area Only Example: a 600GB M.2 NVMe has two partitions.Partition 1 with 158GB and Partition 2 with 200GB. While All Partition Copy mode is selected, these two partitions will be copied and the undefined area will not be copied Percentage Copy - Setting up a end point from 0% starting point When the file system of a M.2 NVMe drive is undefined, Percentage Copy can be used by setting up the ending point of data to copy from the starting point of 0%Non-Zero Copy - Excludes "zero"data area for proprietary sytemsFor unknown or proprietary systems, Non-Zero Copy mode can be utilize to exclude "zero" data area for rapid and efficient copy for M.2 modules that contain proprietary system files such as SGI, BOS, and many other different operating systems.Erase Modes: Quick Erase - Essential FilesErase the index of a M.2 NVMe drive within a few seconds.Full erase - Entire DriveErase the data from a M.2 NVMe module by overwriting each sector which is able to read/write data.3-Pass DoDErase M.2 NVMe module 3 times complying with the 5220.22-M data erase security standard of the U.S. Department of Defense.7-Pass DoDErase M.2 NVMe module 7 times complying with the 5220.22-M ECE data erase security standard of the U.S. Department of Defense to ensure the data is unable to be recovered.Secure Erase The Secure Erase Mode is approved by N.I.S.T. (National Institute of Standard Technology) SP 800-88 for data sanitization solution that most lessens the risk to confidentiality while respecting any other constraints involved.Enhanced SSD Erase The Enhance SSD Erase Mode is approved by N.IS.T. for overwriting predetermined data patterns, data area including sectors that are no longer in use due to allocation. It erases data by using internal M.2 SSD's built-in ATA command.Erase HPA area Remove the HPA (Hidden Partition Area) and free up space Operating TypeStand-alone Disk-to-Disk duplicationNumber of CopiesUp to 9 copies of M.2 PCIe NVMe or M.2 SATA SSDTransfer Speed36GB/min (max speed depends M. 2 NVMe or M.2 SATA Internal SSD)Copy ModeSystem and Files (Quick Copy)Whole HDD (Full Copy)All Partitioned Copy - Partitioned area only*Percentage Copy - Set up End point copy (starting from 0% to end point percentage)*Non-Zero Copy - For proprietary systems such as SGI, BOS, and other unknown formats can be quick copy in the "Non Zero" copy mode to exclude any "zero" data area for rapid and efficient duplication*New Feature exclusive to EZ DupeFormat Supported on Quick CopyWindow: exFAT, FAT16/32, NTFS Linux: EXT2 / EXT3 / EXT4Mac Os: HFS, HFS+, HFSX※Other formats can be copied using the "Whole media" functionErase ModeFull Erase - Whole MediaQuick Erase - Essential FilesDoD 3-pass - 3 times erase in 5220.22-M standardDoD 7-pass - 7 times erase in 5220.22-M ECE standardSecure EraseEnhanced SSD EraseHPA EraseSupported NGFFM.2 PCie NVMe / M.2 SATA 22mm wide keys2230224222602280Key TypesNGFF (M.2) B keyM keyB + M keyLanguage SupportEnglishPower Requirement115V - 230VStorage Temperature4°C ~ 85°COperating Temperature32°F - 140°FStorage Humidity20% ~ 80%Operating Humidity15% ~ 95%ModelDM-HE6-5M09PCWeight13 lbsDimensions18 x 8.25 x 6"RegulationFCC, CE, ULEZ DUPE NVMe Cyclone 600 1 to 9 M.2 NVMe PCIe SSD Duplicator * Ultra-fast duplication speed up to 36 GB/min per each destination slots* Three New Copy Functions: All Partitioned Copy, Non-Zero copy (for proprietary system to exclude "zero area" data for copies) & Percentage Copy (set the end point to copy from 0% starting point) * Intelligent Copy mode to copy System and Files only, There is no need to copy the entire M.2 NVMe and allow you to do more in less time! * Full Copy mode to copy the M.2 NVMe bit by bit (sector by sector)* Daisy-chain allows multiple NVMe Cyclone 300 units for multiple copies from the source to multiple NVMe Cyclone 300 units (Connect up to max of 255 units) * DoD 5220.22-M compliant erase function permanently deletes sensitive data * Downloadable Event Log File for job completed function, time/date stamp, drives' ID# information can be download to the first destination slot* Support all file formats, file size and drive capacity* Support MBR & GPT partitioning schemes and copy device capacity more than 2TB (unlimited) as well as a single file larger than 4GB. The advanced format (4K) is also supported.* Allows to set up a password for system boot-up to prevent unauthorized use.* Intelligent copy across different interfaces. Support PCIe NVMe (M.2) SSD, M.2 SATA, SATA SSD (optional adapter) duplication.* Lower speed M.2 NVMe can be filtered out with setup for higher copy efficiency* OS system files supported: Windows, Linux, and Mac* Standalone system; no computer, software or host required* 1 Year warranty with lifetime support

Price: 13500 USD

Location: Los Angeles, California

End Time: 2024-11-06T21:01:55.000Z

Shipping Cost: 0 USD