Description: Evolution Gun Works (EGW) Colt 1911 Beavertail Grip Safety SS with .220 Radius Evolution Gun Works Description Machined from: Stainless Steel Finish: Stainless Steel Compatible with: Frames cut for a .220" radius, like Springfield or Capsian Not compatible with: The Wilson beavertail cut. In order to utilize our beavertail grip safety on a Springfield or Caspian frame, you will need to weld the tangs. We have had this on our drawing board for years and finally we are manufacturing a beavertail machined from bar stock in stainless steel and carbon steel. Our grip safety will fit the Ruger SR1911 with minimal fitting. Through our years of experience building guns, we were able to come up with a lot of improvements over the various beavertail offerings available today. Our improvements include the following: - Our beavertail is wider than the frame @ .770 (allowing you to the blend the beavertail to the frame, and not the other way around) - The pin hole is reamed to .158 (improving fit and ambi's function) - Lower bottom grip surface (no need to break into the thumb safety hole) - Longer bottom (less gap between beavertail and main spring housing) - Wider bottom to "fill" frame better (around .617) - Bottom radius smaller to better fill frame radius cuts - .308-.309 wide to fit frame ears snug (no rattles) - The pad is fuller and blank allowing for artist's interpretation - No pits, as the part is machined from bar stock - Radius is .220 to better fit frames that are Springfield or Caspian - Bottom angle better matches main spring housing again for less gap. Please note not all parts are "drop in". As with all gun parts some installations may require disassembly and reassembly. Some parts may require installation by a qualified gunsmith. !!ALWAYS MAKE SURE YOUR FIREARM IS UNLOADED BEFORE PERFORMING ANY MAINTAINANCE OR UPGRADES!! No Liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This product should be installed and checked by a qualified gunsmith. Not doing so or using the wrong tools may damage the part and/or your firearm. All Products are made in the USA by Americans. Should you have any questions or issues with your new product please contact me. It is my goal to make my customers 100% satisfied with their purchase (within reason). ***Please Note: All returns MUST Be In Original Packaging and in a resalable, brand new condition. Item(s) must be in new/unused/unworn condition for an exchange/refund. Application errors will incur a minimum of 15% restocking fee. If you are not sure of the product and its use please contact The Sporting Jack for applicability and questions. Used and/or damaged items must be exchanged through the specific manufacturer for warranty issues. If you have any questions or Issues, we are here to help. The Sporting Jack Outfitters is a Certified Service-Disabled Veteran-Owned Small Business. Thank you for your business-Dave Kravetz
Price: 79.99 USD
Location: Victor, New York
End Time: 2024-11-21T16:45:07.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Evolution Gun Works
For Gun Type: Handgun
Type: Mainspring Housing
Color: Silver
Country/Region of Manufacture: United States
Features: Low Profile
For Gun Make: 1911
Gauge/Caliber: all
Material: Stainless Steel
California Prop 65 Warning: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Model: Beavertail Safety
MPN: 10711
