DCA75 DCA-75 PRO SEMICONDUCTOR ANALYZER CURVE TRACER PEAK ATLAS

Description: DCA75 DCA-75 PRO SEMICONDUCTOR ANALYZER CURVE TRACER PEAK ATLAS Building on the continued success of Peak's existing component identification and analysis instruments, the DCA Pro brings an array of exciting new features for the hobbyist and professional alike. Key FeaturesThe DCA Pro is an advanced new design that features a graphics display, USB communications, PC Software and an enhanced component identification library.- Automatic component type identification.- Automatic pinout identification (connect any way round).- The DCA Pro supports all the components that the popular Peak Atlas DCA55 supports, but adds plenty more. Components supported include:- Transistors (including Darlingtons), Silicon and Germanium types. Measures gain, Vbe and leakage.- MOSFETs, enhancement mode and depletion mode types. Measure on-threshold (at 5mA) and approx transconductance (for span of 3mA-5mA).- JFETs, including normally off SiC types. Measures pinch-off voltage (at 5uA) and approx transconductance (for span of 3mA-5mA).- IGBTs (insulated gate bipolar transistors). Measures on-threshold (at 5mA).- Diodes and Diode networks.- LEDs and bicolour LEDs (2 lead and 3 lead types).- Zener Diodes with measurement of zener voltage up to 9V at 5mA.- Voltage regulators (measures regulation voltage, drop-out voltage, quiescent current).- Triacs and Thyristors that require less than 10mA of gate current and holding current.Stand-alone or with a PCThe instrument can be used stand-alone or connected to a PC. Either way, the DCA Pro will automatically identify the component type, identify the pinout and also measure a range of component parameters such as transistor gain, leakage, MOSFET and IGBT threshold voltages, pn characteristics and much more.Curve Tracing When connected to a PC using the supplied USB cable, a range of low current curve-tracing functions can be performed. Various graph types are available, with more to follow: - Bipolar transistor output characteristics, IC vs VCE.- Bipolar transistor gain characteristics, hFE vs VCE.- Bipolar transistor gain characteristics, hFE vs IC.- MOSFET and IGBT output function, ID vs VDS.- MOSFET and IGBT transfer function, ID vs VGS.- JFET output function, ID vs VDS.- JFET transfer function, ID vs VGS.- Voltage regulator, VOUT vs VIN.- Voltage regulator, IQ vs VIN.- PN junction I/V curves, forward and reverse options (for Zener diodes).Curve tracing is performed using test parameters in the range of +/-12V or +/-12mA. All curve-tracing data can be instantly pasted into Excel© for further graphing and analysis. PC Software is included with the DCA Pro on a Peak USB memory stick. Software designed for Windows 10, 8, 7, XP (all 32 or 64 bit). Building on the continued success of Peak's existing component identification and analysis instruments, the DCA Pro brings an array of exciting new features for the hobbyist and professional alike. Key FeaturesThe DCA Pro is an advanced new design that features a graphics display, USB communications, PC Software and an enhanced component identification library.- Automatic component type identification.- Automatic pinout identification (connect any way round).- The DCA Pro supports all the components that the popular Peak Atlas DCA55 supports, but adds plenty more. Components supported include:- Transistors (including Darlingtons), Silicon and Germanium types. Measures gain, Vbe and leakage.- MOSFETs, enhancement mode and depletion mode types. Measure on-threshold (at 5mA) and approx transconductance (for span of 3mA-5mA).- JFETs, including normally off SiC types. Measures pinch-off voltage (at 5uA) and approx transconductance (for span of 3mA-5mA).- IGBTs (insulated gate bipolar transistors). Measures on-threshold (at 5mA).- Diodes and Diode networks.- LEDs and bicolour LEDs (2 lead and 3 lead types).- Zener Diodes with measurement of zener voltage up to 9V at 5mA.- Voltage regulators (measures regulation voltage, drop-out voltage, quiescent current).- Triacs and Thyristors that require less than 10mA of gate current and holding current.Stand-alone or with a PCThe instrument can be used stand-alone or connected to a PC. Either way, the DCA Pro will automatically identify the component type, identify the pinout and also measure a range of component parameters such as transistor gain, leakage, MOSFET and IGBT threshold voltages, pn characteristics and much more.Curve Tracing When connected to a PC using the supplied USB cable, a range of low current curve-tracing functions can be performed. Various graph types are available, with more to follow: - Bipolar transistor output characteristics, IC vs VCE.- Bipolar transistor gain characteristics, hFE vs VCE.- Bipolar transistor gain characteristics, hFE vs IC.- MOSFET and IGBT output function, ID vs VDS.- MOSFET and IGBT transfer function, ID vs VGS.- JFET output function, ID vs VDS.- JFET transfer function, ID vs VGS.- Voltage regulator, VOUT vs VIN.- Voltage regulator, IQ vs VIN.- PN junction I/V curves, forward and reverse options (for Zener diodes).Curve tracing is performed using test parameters in the range of +/-12V or +/-12mA. All curve-tracing data can be instantly pasted into Excel© for further graphing and analysis. PC Software is included with the DCA Pro on a Peak USB memory stick. Software designed for Windows 10, 8, 7, XP (all 32 or 64 bit). Parameter Min Typ Max Note Bipolar Transistors Measurable current gain (hFE) range 2 32000 2 hFE accuracy (hFE<2000) ±3% ±5 hFE 2,8 hFE test voltage (VCEO) 3.0V 9.0V 2 hFE collector test current 4.75mA 5.00mA 5.25mA Base current for VBE measurement 4.75mA 5.00mA 5.25mA VBE accuracy ±1% ±0.006V 8 VBE resolution 3.0mV 6.0mV VBE for Darlington identification 0.95V 1.00V 1.80V 3 VBE for Darlington (shunted types) 0.75V 0.80V 1.80V 4 VBE threshold for germanium 0.55V Acceptable VBE 1.80V Base-emitter shunt threshold 50kΩ 60kΩ 70kΩ Acceptable collector leakage 1.5mA 6 Leakage current accuracy ±2% ±0.02mA MOSFETs/IGBTs Enhancement mode VGS(ON) range 0.0V 10.0V 5 Depletion mode VGS(ON) range -5.0V 0.0V 5 VGS(ON) accuracy ±2% ±0.01V 5 Drain current at VGS(ON) 4.75mA 5.00mA 5.25mA Drain-Source voltage at VGS(ON) 3.5V 9.0V 5 Acceptable gate-source resistance 8kΩ IGBT collector saturation threshold 0.40V 9 JFETs Pinch-off VGS(OFF) range -10.0V 2.5V Pinch-off drain-source current 4.5μA 5.0μA 5.5μA Turn-on VGS(ON) range -9.0V 2.5V Turn-on drain-source test current 4.75mA 5.00mA 5.25mA VGS accuracy ±2% ±0.01V Transconductance (gfs) range 99mA/V gfs test drain current span 3.0mA to 5.0mA gfs accuracy (<20mA/V) ±5% ±2mA/V gfs accuracy (<20mA/V) ±10% ±5mA/V Parameter Min Typ Max Note Thyristors and Triacs Gate trigger test current 8.0mA 10.0mA 12.0mA 7 Load hold test current 10.0mA 15.0mA Diodes and LEDs Diode forward test current 4.75mA 5.00mA 5.25mA Diode forward voltage accuracy ±1% ±0.006V Acceptable VF for a diode @ 5mA 0.15V VF for LED identification 1.5V 4.0V Zener Diodes Zener voltage range at 5mA 1.8V 9.0V Zener voltage range below 5mA 9.0V 12.0V Zener diode test current 0.50mA 5.00mA 5.25mA Voltage Regulators Input test voltage range (IQ<3.0mA) 1.1V 10.0V Input test voltage range (IQ<5.0mA) 8.0V Quiescent current range (IQ) 0.00mA 5.00mA Quiescent current accuracy ±2% ±0.02mA Dropout voltage range (VDO) 0.0V 3.0V Dropout voltage accuracy ±2% ±0.02V Output voltage accuracy ±1% ±0.006V Load test current 0.13mA 1.25mA General Parameters Peak test current into S/C -15.5mA 15.5mA 1 Peak test voltage across O/C -13.5V 13.5V 1 Short circuit threshold 5Ω 10Ω 20Ω 1 Battery type (x1) Alkaline AAA, LR03, MN2400 Battery voltage range 1.0V 1.5V 1.6V Battery warning threshold 1.0V USB current consumption 500mA pk active. ≤2mA sleep Dimensions (body) 103 x 70 x 20 mm 4.1" x 2.8" x 0.8" Operating temperature range 10°C 40°C 10 50°F 104°F 10 Notes:1. Between any pair of test clips.2. Collector current of 5.0mA. Gain accuracy valid for gains less than 2000.3. Resistance across reverse biased base-emitter > 60kΩ.4. Resistance across reverse biased base-emitter < 60kΩ.5. Load current of 5.0mA. 6. Collector-emitter voltage of 10.0V.7. Thyristor quadrant I, Triac quadrants I and III.8. BJT with no shunt resistors.9. Load current typically 10.0mA.10. Subject to acceptable LCD visibility. Dimensions per product (excluding leads and accessories) 103 x 70 x 20 mm (4.1" x 2.8" x 0.8") Dimensions per product (packaged) 200 x 138 x 30 mm (7.9" x 5.5" x 1.2") Weight per product (nett) 0.130kg (4.6oz) Weight per product (packaged inc docs) 0.238kg (8.4oz) Bulk order multiple 20, 80 Harmonisation / Commodity / Tariff Code 9030 8200 00 GB Fundamental Materials Plastic, glass and metal. Country of manufacture England (UK) Certification CE, WEEE, ROHS Thank you for visiting our eBay listing. Our business goals are to: Provide electronic components that are in stock to eliminate long lead times from suppliers. Provide hard-to-find, genuine electronic components fast to help you facilitate your repairs or keep your production running Extend the lifecycle of electronic equipment Conditions New - Open Box or New Other: This means the item is in unused condition but may be missing original packing or it may have the original packing but it was not purchased directly from the manufacturer or it has an old date code and it is no longer manufactured (obsolete). Used: Item that has been previously used but is in working condition. If you have a question about a specific item kindly send us an eBay message and we will respond the soonest as possible. Product Description We try very hard to provide accurate product pictures and titles, in most cases, we take our own pictures unless they are provided to us by the manufacturer. Please note that products like integrated circuits, transistors, etc. might have a different date code, serial number, or batch number than the one pictured, especially those with quantities of more than 10. If you need a specific batch or date code, please let us know via an eBay message and we will let you know the available parts. Shipping All orders will be shipped with a tracking number and safely packed. To avoid mistakes in shipping calculations, please add all the items that you need from our store to your cart for a correct shipping cost calculation. Customs duties and import charges are the buyer's responsibility and are not included in the shipping cost or the item's price. Billing We will always declare and invoice the normal value that you have paid for the item at the time of purchase converted into Euro currency using the conversion rate of the European Central Bank. We can’t ship the products as gifts or with low value or without an invoice. Prestalia e-commerce solutions.

Price: 214.2 USD

Location: Lakkoma

End Time: 2024-11-15T18:49:55.000Z

Shipping Cost: 19.9 USD