DBX DriveRack PA2 Complete Loudspeaker Management System Processor w/Display USB

Description: SAFE & SECURE SHOPPING100% SATISFACTION GUARANTEEDFAST SHIPPINGDBX DriveRack PA2 Complete Loudspeaker Management System Processor w/Display USB Product Description Welcome to my shop!We are committed to bringing you the best merchandise and shopping experience. Looking for a complete loudspeaker management system to fine tune your PA setup? Check out the dbx DriveRack PA2, a loudspeaker management system that can be controlled via your Mac, PC, or mobile iOS or Android device. Using an optional microphone connected to its RTA input, its AutoEQ function can be employed to listen to your room and automatically EQ it for optimized speaker performance. The AFS (Advanced Feedback Suppression) feature is designed to eliminate feedback while preserving the sound of your system. In addition to automated functions, the DriveRack has integrated dbx compression and limiting as well as both a graphic and 8-band parametric EQ section. It also features driver-alignment delays and a crossover section that supports full-range, 2-way, and 3-way systems. You can control the DriveRack PA2 directly by connecting from your Mac or PC via the rear-panel USB port, or connect the PA2 to a wireless router via its Ethernet port for compatibility with iOS or Android devices. AutoEQ The AutoEQ algorithm is designed to ensure an accurate, fast, and nonintrusive automatic EQ experience. With an optional mic connected to the RTA Mic input listening to your room, the DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise. AFS Feedback Elimination The Advanced Feedback Suppression (AFS) algorithm allows for faster, more precise feedback elimination without adversely affecting your systems tone. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before feedback can start, while never altering your sound. Wizard Setup Functions Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date. Wizard functions on the DriveRack PA2 to guide you through step-by-step processes to help you get the most from your loudspeaker system. It helps you configure level balancing, AutoEQ, Advanced Feedback Suppression, and provides access to built-in and constantly updating speaker tunings from most major speaker manufacturers. Input Processing dbx Compression AFS (Advanced Feedback Suppression) Graphic EQ 8-band Parametric EQ (adjusted when using the AutoEQ) Subharmonic synthesis Output Processing Crossover (supports full range, 2-way, and 3-way systems) 8-band parametric EQs (used for speaker tunings) dbx Limiting Driver alignment delays dbx PA2 Specs / Product Specifications Analog InputsNumber of Inputs: 2 x Line Inputs, 1 x RTA Mic Input Connectors: 2 x Female XLR Line Input, 1 x Female XLR RTA Mic Input Type: Electronically Balanced / RF Filtered Impedance: >50 Kilohms Max Input Level (Line Inputs): > +20 dBu CMRR: >45 dB RTA Mic Preamp Phantom Power: +15 VDC Analog Outputs Number of Outputs: 6 x Line Outputs Connectors: Male XLR Type: Electronically Balanced, RF Filtered Impedance: 120 Ohms Max Output Level: +20 dBu Alignment Delay: Up to 10 ms per Output Channel Pair A/D and D/A Conversion A/D Performance A/D Converter: 24-bit with dbx Type IV Conversion System A/D Dynamic Range: 112 dB A-Weighted, 110 dB Unweighted Type IV Dynamic Range: 123 dB with Transient Material, A-Weighted, 22 kHz BW 121 dB with Transient Material, Unweighted, 22 kHz BW 115 dB Typical with Program Material, A-weighted, 22 kHz BW D/A Performance D/A Converter: 24-Bit D/A Dynamic Range: 112 dB A-Weighted, 110 dB Unweighted Internal Processing 32-Bit Floating Point Sample Rate48 kHz Dynamic Range A-Weighted: 110 dB Unweighted: 107 dB THD + N0.003% Typical at +4 dBu, 1 kHz, 0 dB Input Gain Frequency Response 20 Hz to 20 kHz, (+0 / -0.5 dB) Crosstalk Interchannel Crosstalk: < -110 dB, -120 dB Typical (Input to Output: < -100 dB) Latency Input to Output: 1.847 ms Power Operating Voltage: 100 to 120 VAC 50/60 Hz Power Consumption: 22 W Dimensions 1.8 x 5.8 x 19" / 4.4 x 14.6 x 48.3 cm Weight 5.3 lb / 2.4 kg Packaging Info Package Weight6.8 lb Box Dimensions (LxWxH)22.3 x 11.5 x 3.8" Notice：Please dont open cases or return requests without contacting me. If you have any questions about quality, shipping or other problems, please contact me first via eBay message. NoteShipping PolicyReturn PolicyContact UsNote Please check and confirm these things fits yours before buying. If you can//t install, please get professional maintenance staff to help you install. Instruction manual is NOT INCLUDE. Shipping Policy Items will be shipped from our US warehouse. We ship item within 24-48 hours after payment has been verified (Orders are not processed on holidays). The package will be sent to the receiving address you set. Please leaving correct address will minimize delay.Return Policy Return is accepted within 30 days after the buyer receiving the item. If you need return, let us know the detailed problem and send us some pictures for confirmation. Then get a address for return or refund .Contact Us If you do have any questions or concerns, please feel free to contact via eBays contact seller button. We will answer your email within 24 hours except Holidays, Saturday and Sunday.Copyright © 2022 Tongtool

Price: 320 USD

Location: Houston, Texas

End Time: 2024-09-02T02:55:26.000Z

Shipping Cost: N/A USD