dbx 223xs Stereo 2-Way, Mono 3-Way Crossover

Description: **PRODUCT DESCRIPTION** dbx 223xs Stereo 2-Way, Mono 3-Way Crossover Condition: New, Open Box With the dbx 223xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The dbx 223xs Crossover uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs. Specs: Input ConnectorsXLR (pin 2 hot)Input TypeElectronically balanced/unbalanced, RF filteredInput ImpedanceBalanced >50k ohm, unbalanced >25k ohmMax Input>+22dBu balanced or unbalancedCMRR>40dB, typically >55dB at 1kHzOutput ConnectorsXLROutput TypeImpedance-balanaced/unbalanced, RF filteredOutput ImpedanceBalanced 200 ohm, unbalanced 100 ohmMax Output>+21dBu balanced/unbalanced into 2k ohms or greaterBandwidth20Hz to 20kHz, +/-0.5dBFrequency Response< 3 Hz to > 90 kHz, +0/-3 dBSignal to Noise RatioRef: +4 dBu, 22 kHz measurement bandwidthSignal-to-Noise (Stereo Mode)>94dB (Low Output), >91dB (High Output)Signal-to-Noise (Mono Mode)>94dB (Low Output), >93dB (Mid Output), >91dB (High Output)Dynamic Range> 106 dB, unweighted, any outputTHD+Noise< 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHzInterchannel Crosstalk< -80 dB, 20 Hz to 20 kHzCrossover Frequencies (Stereo Mode)Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)Crossover Frequencies (Mono Mode)Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)Crossover Filter TypeLinkwitz-Riley, 24 dB/octave, state-variableLow cut SwitchActivates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.Phase Invert SwitchInverts the phase at the output, one switch per output.x1 / x10 SwitchMultiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.Mode SwitchSelects stereo/mono and 2/3-way operationLF Sum SwitchSelects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode.IndicatorsStereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)Operating Voltage100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZOperating Temperature32°F to 113°F (0°C to 45°C)Power Consumption15WPower ConnectorIEC receptacleDimensions1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)Unit Weight3.7 lbs. (1.7 kg)Shipping Weight5.4 lbs. (2.5 kg) **PAYMENT** Payment will be made through PayPal. **SHIPPING** Most orders ship within 1 business day after receipt of payment. The address provided by eBay or PayPal will be used for shipment. Please make sure you have the correct address on file before placing your order. We are not responsible for wrong or un-deliverable addresses. We ship worldwide with the exception of the countries listed on our eBay excluded list. Please read carefully our international shipping policy below. *Attention International Buyers: 1. We will make sure your order ships on time and with valid Tracking ID, however please note that we can Only provide tracking details for your package while the package within the United States. Once a package leaves the United States we will not be responsible for Final Delivery of your package through your country’s Postal System and ask you to place your International order only if you agree not hold us responsible for Final Delivery Tracking Information. 2. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – Please do not confuse them for additional shipping charges. **RETURN POLICY** We have a 30-day Return Policy. Item(s) must be returned Unopened & Unused in their original condition with all parts and original packaging unless defective. Buyer is responsible for return shipping costs. Once we receive and inspect the returned item, a refund or a replacement will be initiated. International orders do NOT qualify for exchanges or returns.

Price: 225 USD

Location: Los Angeles, California

End Time: 2023-10-31T21:47:03.000Z

Shipping Cost: 29.95 USD