Cognito Motorsports Pitman Idler Arm Support Kit, Steering Braces 01-10 GM 8 lug

Description: IN STOCK AND READY TO SHIP! 110-90715 Cognito Part Number Pitman and idler arm support kit for 2001-2010 Chevy and GMC 1500HD, 2500, 2500HD, 3500HD truck, and 2001-2012 2500 Suburban/YukonXL, and 2003-2011 Hummer H2. For use only on OEM centerlink in OEM position, or OEM replacement centerlink in OEM position. Not for use with lift kits that use a dropped centerlink. Installation Instructions are available here: http://www.cognitomotorsports.com/media/pdfs/7004.pdf Applications:01-10 - Chevy Silverado 1500HD, 2500, 2500HD & 3500 (2wd & 4wd)01-10 - GMC Sierra 1500HD, 2500, 2500HD & 3500 (2wd & 4wd)01-10 - 2500 - Suburban / Yukon XL / Avalanche (2wd & 4wd)03-09 - Hummer H2Description:**HARDWARE FITS FACTORY OR AFTERMARKET PITMAN & IDLER ARMS**Whether your truck is stock height or lifted and running oversized tires, Pitman and Idler arms have always been a problem on the steering systems of GM vehicles. The Pitman and Idler arm Support kit by Cognito Motorsports fixes a wear problem that is present on the factory and aftermarket steering system. Aftermarket companies have come out with heavier duty pitman and idler arms that fail the same way that the factory parts do. The design created by Cognito Motorsports solves the problem in an innovative way that no one else has been able to create before. This design works so well that we were able to obtain a UTILITY PATENT.The Problem: If you are not familiar with how the GM steering system works, here is a quick lesson. The pitman arm is connected to the output shaft of the steering gear box. When you turn the steering wheel of your vehicle, the motion is directed to the steering gear box which then rotates the pitman arm. The pitman arm has a stud protruding from the end of it where the center link connects, also called the drag link. To help control steering motion, the center link is connected to an idler arm on the passenger side of the vehicle. The idler arm is bolted to the frame and swings in the same arc as the pitman arm, and is fastened to the center link the same way the pitman arm is. The two mounting points for the center link give it support in the motion left and right relative to the vehicle, but there is not enough support in the direction of forward to backward relative to the vehicle. This lack of support is what causes the joints inside of the pitman and idler arms to wear out, which provide the pivot and connection point for the center link. The larger the tire on the vehicle, the faster these joints wear out. Aftermarket companies have come out with beefed up pitman and idler arms, but still have the same premature wear issue in the same joint. What Happens: The front alignment toe settings can not be held because of the slop in the pitman and idler arms allowing the center link to move forward and backward. No control over the toe setting means that your front tires will experience irregular and premature wear. When the center link swings toward the back of the truck, it is also swinging up in an arc. The center link swinging up increases the tie rod angle and can cause tie rod breakage. Most tie rod problems actual originate from pitman and idler arm problems.The Cognito Motorsports Solution: The Mechanical Engineer at Cognito Motorsports has come up with a non traditional design to fix this problem, and it works GREAT! The support kit can be installed on pitman and idler arms showing wear, and actually revive them by limiting the movement in the worn direction! If the joint in the pitman and idler arm is not worn excessively, they probably will not have to be changed (this should be determined by a qualified mechanic). If the pitman and idler arm are excessively worn, it is recommended to replace the pitman and idler arms with factory units and add the Cognito Motorsports Pitman and Idler Arm Support Kit.This innovative design is so unique that it obtained a UTILITY PATENT. The support system works by double capturing the studs that protrude from the pitman and idler arms which the center link connects to. At the same time it still allows the studs to pivot on their own axis which is needed when the steering system is turning. This Cognito Motorsports system provides the support needed to prevent the center link from rocking forward and backward in the vehicle.Does NOT fit 1500 Light DutyNOTE: Please do not order if you have one of the following lift kits. This Kit is not recommended for any lift with modified steering or dropped centerlink steering due to a change in geometry.Bulletproof (Any Size)CST Suspension (Any Size)Full Throttle (Any Size)Pro Comp 6" Upper A-Arm Drop KitSuperlift 6" Upper A-Arm Drop KitWhiplash (Any Size)Will Not Fit PPE Aftermarket Pitman and & Idler Arms I have done my best on the application guide, but please verify fitment for your application prior to bidding or purchasing. I cannot guarantee fitment. Installation available for additional charge is also available if local pickup is preferred. Please contact me via email through this listing with any and all questions prior to bidding. Payment due within 48 hrs of auction end. Free shipping only to continental 48 states in the US. Shipping to Hawaii and Alaska available but will require an additional charge.

Price: 259.95 USD

Location: Poseyville, Indiana

End Time: 2024-08-12T21:53:26.000Z

Shipping Cost: 0 USD