Cisco SMALL BUSINESS PRO ( AP 541N ) 802.11n Dual-Band Wireless Access Point

Description: The AP 541N Dual-Band Wireless Access Point from Cisco is a dual-band wireless access point that is perfect for small businesses. The clustering capability makes it easy to set up, configure and manage your wireless network by enabling you to deploy several access points as well as push a single configuration to all connected devices. This simplifies wireless network management with a single system without having to worry about interference between access points or having to configure each access point separately.This dual-band wireless access point is a versatile wireless solution that supports 802.11n wireless connectivity for meeting high bandwidth demands and producing reliable performance. You can choose either 2.4GHz or 5GHz frequency band for greater data transmission and coverage. This wireless access point is designed to connect with other Cisco Small Business Pro Series products for seamless integration. It also comes with a multi-purpose, lockable mounting bracket, which makes it easy to install the wireless access point on walls, ceilings and suspended ceiling railways. Its standard padlock is for theft deterrence.Robust Wireless Coverage & PerformanceThis access point is an 802.11n multiple-input, multiple-output (MIMO) dual-band wireless solution. The 802.11n wireless standard builds on the wireless 802.11a/b/g standards to deliver up to 9 times the performance for greater range and reliability. While 802.11a/b/g wireless standards communicated over a single stream and antenna, the 802.11n wireless standard transmits and receives over multiple antennas to provide higher data throughput. With the ability to configure the access point with either a 2.4GHz or 5GHz frequency band, this wireless access point allows for a cleaner signalSecure Guest AccessSince the Internet has become a staple in our lives, there will be instances where vendors and customers will need access to the Internet while at your business location. This wireless access point comes with an intuitive graphical user interface (GUI) that makes it easy to set up a guest network. This highly secure guest access solution lets visitors connect to the Internet without any visibility of your business network. This prevents guests accessing and impeding the operations of your business. There is even an option to provide a welcome screen to greet visitors who connect to your guest networkAdvanced Clustering IntelligenceClustering is the ability of a wireless access point to form a dynamic, configuration-aware group (a.k.a. cluster) with other similar access points in the same network. All access points in the cluster can self-organize and clone configuration settings to each other to balance wireless channels for minimum radio interference. The cluster also provides a single point of administration so you can manage all the access points as a single wireless network instead of a collection of individual devices without the need for a wireless controllerDeployment Flexibility & SecurityThis wireless access point can operate using either standard AC power or Power over Ethernet (PoE). With PoE, you can connect and power access points with a single Ethernet cable. PoE is convenient when placing access points in areas where power outlets are not accessible. This access point also includes robust security features, such as Wi-Fi Protected Access (WPA2) encryption, rogue access point detection, access control lists and MAC address filteringSimple Setup & ConfigurationThe included Cisco Configuration Assistant software makes it easy to set up your wireless access point and network. Cisco Configuration Assistant gives you the ability to configure and manage your entire wired and wireless network from a single interface Specifications:General:Device Type: Wireless access pointWidth: 11.9 in.Depth: 7.1 in.Height: 1.7 in.Weight: 2.9 lbs.Localization: Canada, United States.Processor / Memory / Storage:RAM Installed ( Max ): 64 MB.Flash Memory Installed (Max): 32 MB.Hard Drive: None.Networking:Form Factor: External.Connectivity Technology: Wireless.Data Transfer Rate: 300 Mbps.Data Link Protocol: IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n (draft 2.0).Spread Spectrum Method: OFDM, DSSS.Remote Management Protocol: SNMP 1, SNMP 2, SNMP 3.Frequency Band: 2.4 GHz, 5 GHz.Status Indicators: Port status, port transmission speed, power.Features: DHCP support, load balancing, VLAN support, Syslog support, firmware upgradable, MIMO technology, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), wireless bridge mode, clustering technology.Encryption Algorithm: 64-bit WEP, WPA-PSK, 128-bit AES, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise.Authentication Method: RADIUS, Basic Service Set Identifier (BSSID).Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0).Antenna:Antenna: External detachable.Antenna Qty: 3.Directivity: Omni-directional.Gain Level: 2 dBi.Expansion / Connectivity:Interfaces: 1 x network / power - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45.Miscellaneous:Cables Included: 1 x network cable.Compliant Standards: CE, EN 300.328, EN 301.489.1, EN 301.489.17, RSS-210, IC, ICES-003 Class A, FCC, UL 60950-1, IEC 60950-1, EN 60950-1, AS/NZS 4268, EN 301.893. Power:Power Over Ethernet (PoE) Supported: Yes.Power Device: Power adapter - external.Voltage Required: AC 120/230 V ( 50/60 Hz ).Software / System Requirements: OS Provided Linux.Cisco Small Business Pro AP 541N Wireless Access Point.The Cisco AP 541N is a 802.11n dual-band clustering access point built for small businesses. The clustering capability makes it easy to set up, configure, and manage a growing wireless network. You can deploy multiple access points and push a single configuration to all the devices within the cluster, managing your wireless network as a single system without worrying about interference between access points, and without having to configure each access point as a separate device.The Cisco AP 541N is a versatile, high-performance wireless solution that supports virtually any wireless application your business requires, including mobile data, voice over wireless LAN, wireless video monitoring, and highly secure guest access. It can be used as a standalone access point in small wireless environments or deployed as part of a larger data and communications network, such as the Cisco Smart Business Communication System (SBCS). Designed to integrate with other solutions in the Cisco Small Business Pro series, it makes even advanced wireless and communications applications easy to install, configure, and support. Key Features 802.11a/b/g/n Wireless Support WPA2 CertifiedPower over Ethernet (PoE)Secure Guest Access ConfigurationCisco Configuration Assistant IncludedMulti-Purpose, Lockable Mounting Bracket

Price: 399.95 USD

Location: Boynton Beach, Florida

End Time: 2025-01-05T01:59:57.000Z

Shipping Cost: N/A USD